Wednesday, May 14, 2025

Science Behind the Magic Drivetrain Compatibility - Art's Cyclery article

 This very useful post appears to have disappeared from the internet but thanks to internet archives i dug it up and here it is. 

Science Behind the Magic | Drivetrain Compatibility

Can I mix SRAM, Shimano and Campagnolo shifters, derailleurs and cassettes? This article will answer that question and more. I’ve commented previously on the lack of standards in the cycling industry. It can be, at times, rather frustrating. Some new part comes out that I really want, but lo and behold, my seat post is the wrong diameter, or this tapered fork is incompatible with my straight head tube. It is a constant battle to keep up with the ever-changing times.

While the industry has advanced in leaps and bounds in the past few years, certain things have stayed relatively the same over the decades. Di2 and EPS excluded, shifting is one thing that is basically the same. Yes we’ve advanced from 5 cogs to 11, and derailleurs now have changed to account for a varying number of forward gears, but we are still talking about yanking on a cable a certain amount to move a chain up and down a line of gears.

This article contains tables with data for cable pull, derailleur shift ratio and cog pitch of SRAM, Shimano and Campagnolo drivetrains. This data can be used to show areas of cross compatibility for mixing and matching groups. Also, I want to discuss the differences amongst drivetrain competitors and the reasoning behind some of their decisions. Before we get into it all, lets define a few terms so that we are all on the same page.

The shifter determines cable pull. Every time you click your shift lever, the shifter pulls in or releases a certain amount of cable. Different brands and different drivetrain speeds (e.g. 9, 10, 11spd) pull different amounts of cable. For the most part, all the cable pulls are uniform for every shift, with the exception of some of the Campagnolo shifters. For example, a Campagnolo 10-speed shifter pulls 2.5mm of cable five times, 3mm twice and 3.5mm twice.

Derailleur shift ratios, also referred to as actuation, are the amount of movement from side to side of the derailleur relative to the amount of cable pulled. Older Shimano derailleurs all have a shift ratio of 1.7. This means that for every millimeter of cable pulled by the shifter, the derailleur will move 1.7 millimeters.

Cog pitch is the distance from the center of one cog on the cassette to the center of the next. Cog pitch changes between major brands and as more gears are added, usually cog pitch shrinks to fit more gears into the same width freehub body.

These three numbers are related by the following equation:

Cable pull * Derailleur shift ratio = Cog pitch

Looking at this equation, you can imagine the thought process behind some of the designs. If an engineer a few years ago wanted to design 10-speed drivetrains, but they wanted them to fit on the current 9-speed bikes, then the 10 cogs must fit in the same amount of space on the freehub body as the 9 previous cogs. To do this the engineer will reduce the width of the spacers between each cog. So now all the cogs are closer together. To save time and money, lets leave the derailleur design virtually the same; we will just slap a nice shiny 10-speed graphic on it. But if the cogs are closer together, we need to change the shifter design so that it only pulls the cable just enough to get to the next cog. So the shifter is redesigned with an extra “click” and now each shift pulls 0.2mm less of cable than before. Obviously the design process is not this simple, but hopefully this over-simplified example helps to explain how things work.

Tables below contain measurements for cable pull, derailleur shift ratio and cog pitch for varying drivetrains. We want to keep this table updated as new information becomes available, so feel free to comment on the bottom of the post if there is information that you think we missed or should be added.

ShifterCable Pull (mm)
Shimano 10 Road2.3
Shimano 92.5
Campagnolo 112.6
Shimano 11 Road2.7
Campagnolo 102.8
Shimano 82.8
Shimano 72.9
Campagnolo new 93
SRAM (Exact Actuation) 10 Road/Mountain3.1
SRAM (Exact Actuation) 11 Road3.1
Campagnolo old 93.2
Shimano 63.2
Shimano 10 Mountain3.4
SRAM (X-Actuation) 11 Mountain3.48
Campagnolo 83.5
Shimano 11 Mountain3.6
SRAM (1:1) 9 Mountain4
SRAM (1:1) 8 Mountain4.3
SRAM (1:1) 7 Mountain4.5

CassetteSprocket Pitch (mm)
Campagnolo 8-speed5
Shimano/SRAM 8-speed4.8
Campagnolo 9-speed4.55
Shimano/SRAM 9-speed4.35
Campagnolo 10-speed4.15
Shimano/SRAM 10-speed3.95
SRAM 11-Speed Road3.72
SRAM 11-Speed Mountain3.9
Shimano 11-Speed Mountain3.9
Campagnolo 11-speed3.76
Shimano 11-speed Road3.69

DerailleurShift Ratio
Shimano Standard1.7
Shimano Standard w/ Hubbub1.6
Campagnolo (new)1.5
Campagnolo (old)1.4
SRAM (Exact Actuation)1.3
Shimano 10-speed Dyna-sys1.2
SRAM (X-Actuation)1.12
SRAM (1:1)1.1

Update 2/13/15: Please note when using the equation relating cable pull, shift ratio, and cog pitch, the calculated values will vary slightly from the those listed above. The precision of measuring equipment leads to as much as a 3.24% difference in calculated and measured values. Below, the chart compares the measured values of cog pitch with those calculated by multiply shift ratio with cable pull. This percent error does not mean that the numbers are incorrect, it simply suggests that more precise measuring procedures would be required to eliminate the difference.

 

 Cable PullDerailleur RatioCalculated Cog PitchMeasured Cog PitchPercent Difference
Shimano 63.21.75.445.501.10
Shimano 72.91.74.935.001.41
Shimano 82.81.74.764.800.84
Shimano 92.51.74.254.352.33
Shimano 10 Road2.31.73.913.951.02
Shimano 10 Mountain3.41.24.083.953.24
Shimano 11 Road2.71.4*3.69
Shimano 11 Mountain3.61.1*3.90
Campagnolo 83.51.44.905.002.02
Campagnolo old 93.21.44.484.551.55
Campagnolo new 93.01.54.504.551.10
Campagnolo 102.81.54.204.151.20
Campagnolo 112.61.53.903.763.66
SRAM (1:1) 7 Mountain4.51.14.955.001.01
SRAM (1:1) 8 Mountain4.31.14.734.801.47
SRAM (1:1) 9 Mountain4.01.14.404.351.14
SRAM (Exact Actuation) 10 Road/Mountain3.11.34.033.952.01
SRAM (Exact Actuation) 11 Road3.11.34.033.722.01
SRAM (X-Actuation) 11 Mountain3.51.123.903.900.06

*Shimano 11-speed groups do not have any published data regarding derailleur ratio. The ratio listed was calculated by measuring cable pull and cog pitch and solving for the ratio.

If you find the tables a little hard to decipher and compare, then the next sections might make things a little easier. We will discuss popular combinations of components followed by three sections that each pertain to a specific manufacturer and discusses the history and revisions to the systems over the years.

While the market is large and there are many different varieties of derailleurs and drivetrains, I would guess that 90% of people reading this article are using Shimano, SRAM or Campagnolo 8/9/10 or 11-Speed systems so we will focus on those combinations.

Mixing and Matching

It is important to keep in mind that while you find a lot of information that claims compatibility between different brands and groups, experiences will always vary. Things might seem to work well for a while, but later on, chain’s stretch, teeth get worn down, and all of a sudden shifting becomes shady. Just keep in mind that Campy engineers didn’t design any of their components to work with Shimano or SRAM or any mix in between. Mixed component group compatibilities are more of a coincidence than anything. Yes, cyclocross racers, monster ‘crossers, steep road aficionados, I’m talking to you. These riders are most likely to play the component mix up game because they desire dropbar shifters with mountain cassette ranges that require mountain derailleurs with long cages for a larger maximum tooth capacity. Until SRAM CX-1, they had no choice but to play the mix and match game. Please watch this public service announcement to gain awareness about a real issue that faces all cyclocross racers in particular.

With that disclaimer I will say that if the cable pull, ratios and cog spacing truly are matched, there won’t be an issue. The perfect example is cross compatibility between SRAM 10-speed mountain and road. These groups work together—period. Bicycle manufacturers, including Specialized, sell new bicycles with mixed groups like this. I fully encourage you to tinker and try different combinations with your new-found knowledge as you build your perfect steed.

Moving on from perfect matches, things get more complicated; we start mixing between brands. With varied success, there are a few different popular combinations today. Shimergo is the mix and match of “Shim”ano drivetrains with Campy “Ergo” shift levers. This is possible because the cable pull between the two is so similar. Routing of the cable a little differently through the derailleur effectively changes the ratio to make things line up. This is called the Hubbub routing method. But, as noted earlier, Campagnolo Ergo levers pull 2.5mm of cable five times, 3mm twice and 3.5mm twice and Shimano derailleurs are designed around consistent cable pull each time. There is a fudge factor of compatibility though and there are numerous reports of success online. The methods require a reduced speed; meaning 9-speed levers with an 8-speed cassette. If you are interested in setting up a Shimergo setup, there are plenty of articles and forum posts out there to help you with your setup.

With the Shimergo setup, it is also worth mentioning Jtek Engineering. Their most popular product, the Jtek ShiftMate, uses a pulley to change the ratio of the amount of cable pulled by the shifter. There are four different pulleys available to allow you to run numerous combinations of Shimano and Campagnolo 8 through 11-speed systems together. Here is an article that details one rider’s experience of moving from the Hubbub method to a Jtek ShiftMate.

Screen shot 2014-12-17 at 11.31.25 AM

JTek ShiftMates use a pulley to reduce or increase the ratio of cable pull to create compatibility between shifters, derailleurs and cassette spacing. Four different pulleys can be setup eight different ways to change the amount of cable pull in the system.

As mentioned earlier in this article, there are reports that XTR 11-speed cassettes use nominally the same spacing as SRAM 11-speed mountain systems. Some people are reporting success on forum posts.

And lastly, despite differences in cog pitch, it seems that there has been some success with mixing cassettes between 11-speed road systems as detailed in this VeloNews article by Lennard Zinn, the author of the popular Zinn Mountain and Road Maintenance books. Again, note that only the cassettes are being swapped, shifter and derailleur brands must still match in these instances due to significant differences in cable pull and derailleur ratio.

Shimano

Starting with Shimano, this could be the simplest section of them all if we could just talk about everything up to 9-speed. Basically everything Shimano did up until then was cross compatible. They used a derailleur shift ratio of 1.7 on everything. While the cable pull varies from 8-speeds to 9-speeds as they moved the sprocket pitch closer together, the derailleur remains the same. Shimano 10-speed road groups adhere to this design as well. It’s the 10-speed Dyna-Sys mountain systems that veered away from the norm—More on that in a second. So let’s say you have an older 8-speed Shimano drivetrain on your bicycle and your derailleur breaks. You hunt around and can’t find a replacement for your old derailleur anywhere… Fear not! Because a brand new Shimano Ultegra 6700 10-speed derailleur has the same shift ratio of 1.7, it is completely compatible. Your old 8-speed shifter will pull the same 2.8mm of cable as before, and the derailleur will move the same 4.8mm pitch required to push the chain to the next cog.

Now here’s where things get tricky, as more gears are added and everything gets closer together, tolerances get tighter. This means that with a little bit of dirt in the cable system, the derailleur doesn’t quite move as far as it should, and all of a sudden you’re in the wrong gear and your bike is ghost shifting like crazy. Enter Shimano Dyna-Sys. In the simplest terms, Dyna-Sys increased the amount of cable pulled and decreased the amount of derailleur movement per millimeter of cable pull. Because Shimano 10-speed road is the same 1.7 ratio as before, lets compare the 10-speed Shimano road to the 10-Speed Shimano Dyna-Sys mountain. The cassettes are the same width, with a cog pitch of 3.95mm. But the difference is that 10-speed road pulls 2.3mm of cable, compared to the 3.4mm of cable that Dyna-Sys pulls. So in order to end up in the same gear after a shift, the derailleur ratio is reduced from 1.7 to the new Dyna-Sys 1.2 ratio. The main reasoning behind this design change is that with more cable pull, a turn of the barrel adjuster gives much more incremental fine-tuning. Dyna-Sys allowed Shimano to squeeze 10-speeds into the same freehub body and still maintain quality shifting that stays in-tune. While I can’t speak for the engineers, I would say that Dyna-Sys was considered not necessary on road systems, because they weren’t being beaten around quite like a mountain system, until 11-speed road was introduced. Now the Shimano 11-speed road systems have a type of modified Dyna-sys that keeps them in-tune with tighter cog spacing but is completely incompatible with 10-speed road or mountain.

One of the most interesting things to happen to drivetrains lately is electronic shifting. The derailleur shift ratio is essentially programmed into the mechanism. Cable pull is completely eliminated. The shifters simply contain upshift and downshift buttons, with nothing internally that determines how many shifts you can perform beyond programming. In a perfect world you could plug your drivetrain into your computer and tell it how many gears your cassette has and the cog pitch. The derailleur and shifters could then reprogram themselves accordingly. Unfortunately we don’t live in a world like this yet. Perhaps someday someone will “Jailbreak” Shimano Di2 systems, allowing on-the-fly reprogramming of all components. Currently it is possible to swap a 10-speed derailleur for an 11-speed, resulting in your Di2 10-speed shifters reprogramming themselves with 11-speeds. This only works for specific models and firmware versions, so I encourage you to watch our video if you are interested in learning more.

SRAM

SRAM has basically approached the situation with the same method as Shimano with a few exceptions since they entered the arena a little later on. Early on, SRAM produced shifters that were cross compatible with the Shimano 1.7 ratio. This was called the SRAM (2:1) family of products. For the most part though, SRAM used their 1:1 actuation on 7/8/9-speed systems. Referencing the SRAM website, “Every unit of cable you pull moves the derailleur the same amount.” Comparable to the Dyna-Sys release, with 10-speed systems both road and mountain, SRAM introduced Exact Actuation. The nice thing about the SRAM system is that all mountain 10-speed and road 10-speed are compatible, all using Exact Actuation. So you can use road shifters, with mountain derailleurs and vice versa—though it will be necessary to throw an inline barrel adjuster in the mix when using road shifters with mountain derailleurs. I think the best easter egg of all of this is that Exact Actuation remained for SRAM 22 road groups. Meaning that if you wish to upgrade to SRAM 11-speed and you already have an 11-speed compatible freehub body, all you need is a new rear shifter, cassette, and chain. The cog pitch and derailleur ratio is the same on 10 and 11-speed road. So with a new shifter, your 10-speed derailleur turns into an 11-speed derailleur.

Unfortunately the same cannot be said for the SRAM 11-speed mountain systems. SRAM Mountain uses a new X-Actuation setup that once again changes ratios and increases the amount of cable pulled. So SRAM Mountain is only compatible with itself for the time being. Although interestingly enough, people on the forums are reporting that the new XTR 11-speed systems seem to run smoothly with a SRAM 11-speed cassette. Art’s examined an XTR M9000 cassette alongside a SRAM XX1 cassette and upon visual inspection and measuring as accurately as possible with our digital calipers, both cassettes seem to have a cog pitch of roughly 3.9. I say “roughly” because I am unsure of the accuracy of measurements and would like to use more precise tools to confirm. Unfortunately SRAM and Shimano both declined to provide hard numbers after I contacted them. Please note that shift pull and derailleur ratios are still different, so while you may be able to swap cassettes, you cannot use a SRAM shifter with an XTR derailleur or the other way around. Compatible cassettes do introduce some interesting combinations since XTR M9000 cassettes work with 9/10-speed freehub bodies while SRAM 11-Speed only works with the new XD driver bodies.

A good comparison between SRAM 11-speed mountain and road systems lies in the Force CX-1 Drivetrain. It is the result of a drunken hookup between a SRAM Force 22 road group and a SRAM mountain group. The result is a cassette with cog pitch, cable pull and derailleur ratio (Exact Actuation) from the road group. But with technologies like X-Horizon and a Roller Bearing Clutch made popular by the mountain group. Because the CX-1 derailleur is basically an X1 derailleur with some modification, it is easy to show the most substantial differences by putting them side-by-side.

IMG_1740

Force CX-1 and X1 Mountain derailleurs side by side. Main differences viewed here lie in the design of the cage. The mountain derailleur on the right is designed for larger maximum tooth cogs (42T) and take up the extra chain slack required in the mountain system. This picture shows the two derailleurs without cable routing devices installed—seen in the next picture.

IMG_1749

These two cable routers (Left: Force CX-1, Right: X1 Mountain) are designed differently to change the angle of entry of the cable into the derailleur body. They are interchangeable between the two derailleurs, but it wouldn’t do you much good as it will change the way the derailleur works. The CX-1 version has a built-in barrel adjuster since the shift lever doesn’t have one like its X1 counterpart.

IMG_1736

After running through the cable routers pictured previously, the cable runs around a lever arm guide before being clamped in the cable bolt. Comparing the two lever arms in the above picture, we can see how the length of the arm has changed to change the derailleur shift ratio so Force CX-1 will be compatible with 11-speed road instead of 11-speed mountain with a different cog pitch.

Campagolo

And finally we discuss Campy. This section is infinitely less complicated. There are no mountain components to contend with, just road groups. Lets discuss 8 through 11-speed groups. Instead of Dyna-Sys, Dyna-Sys11, 1:1, Exact Actuation, X-Acuation or any other fancy marketing terms you could possibly come up with, we will refer to the systems as Campy “old” and Campy “new”. Campagnolo changed the shift ratio and cable pull between the two systems. 8-Speed systems are Campy “old.” 9-speed systems come in both varieties. The “new” 9-speed systems were produced after 2001. Most likely you have a newer group, but if you are unsure, old-style controls are absent of graphics or have the groupset name on them and new-style will be printed with “9-speed.” Newer 9-speed derailleurs moved the “B” adjuster screw down by the cage, as opposed to the old-style that places it where Shimano derailleurs typically have it by the frame and mount point. After that its easy, 9/10/11-speed systems are all the same. Just match the number of gears on the cassette with the number of clicks in the lever (minus 1, because 10-speed shifters make only 9 clicks) and you are good to go. The derailleur ratio remains the same across the range.

This is a lot to absorb after one reading so I encourage you to reread the specific sections that pertain to you. I hope this sheds a significant amount of light onto the industry and compatibility amongst components. I think that one thing I took away from the process of researching for this article is that most of the decisions made around these differing designs were made to try and make upgrades easier. So while we might complain that 11-speed is expensive and you have to replace everything, just remember that without Dyna-Sys11 or X-Actuation shifting, the cassette would probably get wider, and then we would need wider wheels and wider frames and it would snowball from there. The tables earlier in the article show collected data for cable pull, derailleur ratio, and cog pitch for most component groups. I hope to keep this table up-to-date with new drivetrains and information, so feel free to comment below with any information you believe should be added as we try and make this a resource for everyone.

Science Behind the Magic delves into the inner workings of your two-wheeled steed. Web Content Editor, Brett Murphy, uses his mechanical engineering background to explain the latest industry advances and breakdown component design.

Tuesday, April 29, 2025

Challenge Getaways

 Last summer I was just riding along and sliced open one of my pirellis (ok i was going too fast through a loose, rocky, downhill turn in the middle of glacier), and after a couple seasons on the same tires i decided to try something else. We had some nice, big 45mm challenge getaways on the shelf and my new bike had the room to fit them so that made it a pretty easy decision.



These tires look really good and are like big fluffy clouds to ride on and they go fast. For tires that actually have tread, they are one of the fastest things on bicycle rolling resistance. Out of the box they measured over 47mm on a 23mm hookless rim and are more like 48mm now even at 25psi.


So that was the good, but there are some drawbacks. Mainly, cornering grip is not really great especially if it's loose. the big edge knobs of the pirelli gravel RC are really good and those come in big sizes too. I also do not trust these around sharp rocks. But after nearly 3k miles of riding through the fall and spring I have not had any punctures and now they're due to be replaced.

These definitely get my "would buy again" seal of approval, and they look good. But next I'm going to try the new schwalbe g-one r/rs pro in 50mm, so we'll get that posted sometime soon once I put them on.

Schwalbe Rick XC

 Got some new mtb tires this spring. On my trek hardtail I had been riding schwalbe thunder burts for the last two years, and while i like them and they are really fast, I wanted to go to something with a bit more grip. Enter schwalbe's new Rick XC, which is supposed to be wider, faster than a racing ralph, and have more grip than the thunder burt. So I got some.



here it is compared to my thunder burt


Listed weight is 760g for a 29x2.4 and one of them was there, at 750g, but the other was not.


Soooo, the heaviest tire i've had in awhile. But at least it's 2.4" or 62mm wide, right?


This is on a 29mm internal width bontrager rim.

So, that's not great. a 2.25" tire that is almost 800g. Not thrilled.

But how do they ride? well, seems pretty good. They are fast and the traction when you lean them over is good. the edge knobs bite and pull you through the corner really well, and I like that from a tire. Some just kind of feel the same no matter the lean angle where others really grab and give you some confidence and get the bike turning.

I've ridden these down our local rim and tire wrecking trail- chopsticks on mt sentinel- a few times, with no slices or punctures, so that's good. My friend Phil has not had great luck going down that one.

I also went down my local smooth and fast trail- ravine, and set my 2nd fastest time ever without really trying to go fast.

So, in conclusion, it's a pretty fast tire with more traction than the thunder burt. BUT, it is narrower than listed and might be heavy too. I'm going to keep them but probably won't be my next tire unless they fix them to actually measure 2.4" wide (and I did give them a good amount of time at high pressure to stretch out).





Tuesday, September 10, 2024

Overnight to wallace, id

 With the extra days off over labor day I decided to go on a quick trip. I've been threatening to go ride my bike into the forest and not come back for awhile now and finally did something about it. I do have frame bags and a big handlebar roll and a lightweight tent and stuff to try bikepacking but yeah nah I stuck a big saddle bag on my gravel bike with a change of clothes and booked a hotel room in wallace, id.



I have been drawing lines on maps and planning routes in the region between missoula and idaho a lot recently so while I have some other ideas for 2-3 day trips from home I decided to give this one a try. From home it was going to be about 130mi each way but I got a little bit of a late start monday and drove about 30mi west of town and parked at a friend's house. This didn't really subtract anything from the trip as it's a pretty boring ride out there that I do all the time.

So yeah starting point in the ninemile valley, which runs mostly west and north.


There's one main way out of there at the end, over siegal pass, and some other possible routes that i've drawn out but haven't really tried. The line I had put me right in st regis, mt, along I90 where the clark fork river takes a turn and goes over to meet the flathead river. The valley gets narrower and steeper and then you're really climbing


I came from down there


I'm going down there


The climb up was really loose and rocky and difficult in places and I was a little concerned about the trip down the other side. I also have some pretty flimsy challenge getaway tires on the bike right now so definitely needed to be careful. But the road was super, super smooth dirt




It kind of looked like hardly any cars ever drive on it.

Where am I going?


Where am I?


Anyway after a really nice ride down amazingly smooth dirt roads I notice a sign that says "road closed 1.5 miles." Surely that doesn't apply to me. Get to a gate and a ranch that says "stop" and road closed but there's also not anything saying no tresspassing and there's a hunter's sign in box so I go by and ride through the ranch and it seems fine. Come out the other side and stop in st regis and refill my bottles.

Then it's old rail bed all the way to wallace on the route of the olympian and the northern pacific route up and over lookout pass. The hiawatha trail is a really popular biking thing and you can rent bikes and get shuttled on it so you're only going downhill, through old tunnels and over bridges and stuff. So I was expecting a little more out of the route but it was really just a long long time on straight and almost flat road



I did cross one bridge which seemed a little bit sketchy. The railings and wood on the edges were kind of falling apart and it was really high up.

Anyway getting closer to the pass was more interesting but the one tunnel it goes through is closed due to safety reasons and there's a steep bypass around it


At lookout pass I stopped for some more water and stuff and then it was all downhill to wallace


Wallace, ID

First stop was the hotel but as I rolled up a van full of people was unloading and checking in so I went to the brewery. Then got checked in, and they even had rags for cleaning bikes and didn't say anything when i rolled mine through the lobby and to my room. And they had a pool and hot tub. So yeah, wallace inn seems like a good choice if you're there. Had some dinner in town, got some snacks and stuff at the store, sat in the hot tub for a bit, then went to bed fairly early.


My route home was different from my route there, going over cooper pass and into thompson falls, downstream of where the flathead and clark fork meet. The road goes out a super narrow valley filled with old mines and it was fairly interesting, but also... not nice. Dilapidated shacks and campers everywhere and broken falling apart shit and old mines and mine waste.


There was a construction project putting in a new culvert for the creek in burke that i had to wait a bit to get through

Then dirt and up more


Something like 3000ft of climbing to start my morning and then a really steep descent down the other side that had me concerned about the brakes. you want fresh fluid and pads for that one for sure.

Then pavement for awhile into thompson falls. I've ridden this road a few times and the climb up and over thompson pass is really neat. You can get to wallace all on pavement but the route i took is a lot more direct. From thompson falls I had to ride 25mi on hwy 200 to plains but being tuesday at like noon after labor day traffic was pretty light. Good thing because there's little to no shoulder for some of it, and the rumble strips are kind of dead center where there is a shoulder which gives you a very narrow strip of smooth pavement


Then I got to plains and crossed the river and took a back road bypassing highway for awhile.




Then it was a couple more miles on 200, then a turn onto 135, which goes along the clark fork and would put me back in st regis if was going that far. But I wasn't, and after 3mi I took a left turn to go up to siegel pass and back into the ninemile



how far is it to the top?


almost there?



siegel pass, came from down there


almost crashed on the descent when i got into the loose stuff on the edge and had my front tire slide a bit. Almost to the end but actually still far from anywhere and without reception. would have been a real bad spot to hurt myself. i should probably get an inreach or something.


anyway made it down, are we fucking there yet?


about 7-8 more mi from there. Anyway, made it back to car. good route, fun trip. pretty hard. Little over 100mi and like 7k feet a day. monday almost entirely dirt and gravel, tuesday almost half pavement.


day 1: https://www.strava.com/activities/12310894722

day 2: https://www.strava.com/activities/12319339099

Sunday, June 2, 2024

The new Vittoria Mezcal

 Being one of my favorite tires, I was excited to see a new version of the Mezcal floating around last year, ridden by pros and sponsored riders. They released them this spring and I ordered a set for the hei hei, which had been rolling on some syerras since last summer, and was due for some fresh XC tires.


Here it is next to the old mezcal. The previous xc-trail and xc-race tires were both available in 29x2.25 and 2.35, which is kind of not a big enough difference to bother imo but anyway the new one is now a 2.4, or 60-622. The old tires were the "anthracite" grey casing for the trail version and then a tan wall for race, both 120tpi but a little thicker on the trail version. The new "XC RACE" tire is 60tpi and available in both black and tan, with no apparent difference between the two other than color. I would have preferred black I think but tan was the color actually in stock so hey lets try a new look


Pretty good what with the matte green frame accents and copper chain and such. Guess I have an earth tone vibe going currently.

In addition to being wider and possibly more durable than the previous race version with the lower thread count, these use a new rubber compound that is supposedly softer, grippier, but still faster rolling. It also costs $10 more at retail, which to me seems a little strange given a lower thread count casing and a single compound rubber, where the old tire had a "4c," 4 rubber compound. That's one hard base layer, a medium hardness down the center, and then softer on the cornering knobs. So probably they're going to wear out faster and might have been cheaper to make. But it's ok vittoria i still like your tires.

I put both on the scale, listed weight is 730g, mine measured 742 and 760. I measure both because I'm a nerd and also to put the heavier one on the back. So a little heavier than they say, and not any different than the old xc-trail 29x2.35 I pulled out of the package (i think it was 750ish).


Maybe you can do this with most tan wall tires but it's a little unsettling that you can see light through the sidewalls


Seems like I should stay away from sharp rocks... The weight and thread count at least suggest similar durability to the old xc-trail, which i always felt were pretty reliable.

It does also appear the tread itself is slightly wider on the new 2.4 when put up next to a 2.35 but I didn't actually measure it



Anyway, I have a couple rides on them, both up mount dean stone actually. First one was thursday with team stampede, up to the top and back down. Then saturday after work I did a longer loop, riding up dean stone, across house of sky, down into pattee through sam braxton, up crazy canyon to the top of mt sentinel, and then back into town via chopsticks and the moZ.

So we did hit a few rocks out there, especially down chopsticks, and I managed not to slice open a brand new tire.

These haven't been tested on bicycle rolling resistance yet (as a pro member I voted for them as well as the new peyote), but the old version is pretty fast and definitely felt fast riding it. These new ones also feel fast, and currently my mtb tire speed butt dyno is calibrated to the schwalbe thunder burt, the fastest tire tested by BRR, on my pretty lightweight hardtail. So, "feels fast" to me coming from that bike at least is some sort of an indicator that they actually are.

The casing is still light and supple with the lower thread count and feels good. You could say lively, springy, responsive perhaps. The rubber is definitely soft and grippy and i didn't notice a loss in traction compared to the slightly worn syerras. But a new tire with fresh, sharp knobs always feels good.

So yeah, initial review, seems good. mainly I like that they have a bit of extra volume. Probably the only reason to not ride a 2.4 XC tire these days is if you weigh 100lbs. Wednesday night we're on the traditional xc course at marshall, which, I'll probably ride on the trek but it is tempting to take a spin on the hei hei, which definitely gets down to the bottom faster and is more fun, but probably is actually slower over a full lap due to the weight and tire difference. Should probably do some back to back test laps some day.

Sunday, May 5, 2024

Unravel the scratchgravels XC race report

 Went to Helena and raced the scratchgravels this weekend. This was the first mountain bike race I ever did, back in 2014, on my Kona King Kahuna. I think I won the cat 3 2 lap race, and remember getting lapped by Landon Beckner, who was a pretty promising young junior at the time. My laps were about 27min long and my average speed according to strava was 12.9mph.

I've since improved a little at bike racing, despite now being 10 years older. It appears my fastest recorded lap on strava was 22:10 in 2022, on my hei hei. the last two years I've done it on my procaliber, but the start got moved forward a bit so the first laps aren't getting counted on the strava segment.

Anyway, yeah, been going to this race for awhile now. it's on low elevation trails and double track on the northwest side of Helena, and is a great first race of the season in montana. It's also great for younger racers and beginners and i try to do a little promotion in Missoula to get people to go out to it. This year we had 3 of the team stampede kids but not too many others. Kalispell brought the usuals of Matt, Joel, Stella, Alan was there from bozeman, and I think they were fairly happy with the total registration numbers.

The start is uphill on a double track so it's a little narrow and at best you might get 5 wide on the line. I was on the 2nd row and at the start slotted into about 4th wheel on the left tire track. It took me about a minute to get a little impatient plus I noticed the guys in the track next to me possibly creeping up, so instead of staying there and getting boxed in and being in the bunch for the first downhill corner I picked up the pace and hopped over into the other track, then led over the crest of the first hill and into the turn. going into it first means I got a nice clean wide line and immediately created a little gap, leaving the others to chase me on the generally uphill but rolling double track, then there's an really annoyingly steep short climb into the first singletrack section.

I kept on it and had Matt and one other guy chasing me, just a few seconds back but never on my wheel through most of the 1st lap. You reach the low point of the course and then climb back up on doubletrack to the start finish and that was where Matt got the closest. he was essentially on my wheel but I really wanted to make him work for it since we were uphill into a headwind and he never quite got there. From there it was pretty uneventful- the gap kept creeping up and then I just kept up a steady pace and kept drinking my drink mix, and held on for the win. very cool to get that one and a nice start to the mtb season. Thanks Helena united cycling for putting it on.

Going to the strava data my overall time was over 4min faster than 2022 when I set that "fastest lap." but by selecting first lap it appears i was at least a few seconds faster. Was also about a minute and a half faster than last year on the same bike in similar conditions (cool, cloudy, some very light rain, a little wind). Average speed this time was 15.2, for 4 laps.